The Sipwise C5 version mr8.4.2 has the following important changes:
Some important technical points for those interested:
Please find the complete changelog in our release notes on our WEB site.
The Sipwise C5 software upgrade procedure to mr8.4.2 will perform several fundamental tasks:
It is recommended to execute the preparatory steps in this chapter a few days before the actual software upgrade. They do not cause a service downtime, so it is safe to execute them during peak hours.
Run the terminal multiplexer under the sipwise user (to reuse the Sipwise .screenrc settings that are convenient for working in multiple windows):
screen -S my_screen_name_for_ngcp_upgrade
Become root inside your screen session:
sudo -s
For the below steps, investigate and make sure you understand why the custom modifications were introduced and if they are still required after the software upgrade. If the custom modifications are not required anymore, remove them (e.g. if a bug was fixed in the target release and the existing patch becomes irrelevant).
| warning | |
If you directly change the working configuration (e.g. add custom templates or change the existing ones) for some reason, then the system must be thoroughly tested after these changes have been applied. Continue with the software upgrade preparation only if the results of the tests are acceptable. |
Find the local changes to the template files:
ngcp-customtt-diff-helper
The script will also ask you if you would like to download the templates for your target release. To download the new templates separately, execute:
ngcp-customtt-diff-helper -d
In the tmp folder provided by the script, you can review the patchtt files or merge the current customtt with the new tt2 templates, creating the new customtt.tt2 files. Once you do this, archive the new patchtt/customtt files to reapply your custom modifications after the software upgrade:
ngcp-customtt-diff-helper -t
Find all available script options with the "-h" parameter.
Check if there are any *.tt2.dpkg-dist files among the templates. They usually appear when tt2 files are modified directly instead of creating customtt/patchtt files. If you find any *.tt2.dpkg-dist files, treat the corresponding tt2 files as if they were customtt.tt2 and introduce the changes from the existing tt2 files into the new templates (create associated customtt.tt2 or patchtt.tt2) before the software upgrade.
find /etc/ngcp-config -name \*.tt2.dpkg-dist
Note that in the end all *.tt2.dpkg-dist files must be removed before the software upgrade as they prevent the upgrade script from updating the tt2 files.
Check and remove dpkg files left from previous software upgrades.
Make sure that the list is empty before you continue:
find /etc/ngcp-config -name \*.tt2.dpkg\*
Changes made directly in tt2 templates will be lost after the software upgrade. Only custom changes made in customtt.tt2 or added by patchtt.tt2 files will be kept. Hence, check the system for locally modified tt2 files on all nodes:
ngcp-status --integrity
Check the configuration framework status on all nodes. All checks must show the "OK" result and there must be no actions required:
ngcpcfg status
Run "apt-get update" and ensure that you do not have any warnings and errors in the output.
| warning | |
If the installation uses locally specified mirrors, then the mirrors must be switched to the Sipwise APT repositories (at least for the software upgrade). Otherwise, the public Debian mirrors may not provide packages for old Releases anymore or at least provide outdated ones! |
| info | |
Sipwise C5 can be upgraded to mr8.4.2 from previous release or previous build only. The script ngcp-upgrade will find all the possible destination releases for the upgrade and makes it possible to choose the proper one. |
| info | |
If there is an error during the upgrade, the ngcp-upgrade script will
request you to solve it. Once you’ve fixed the problem, just execute
|
The upgrade script will ask you to confirm that you want to start. Read the given information carefully, and if you agree, proceed with y.
The upgrade process will take several minutes, depending on your network connection and server performance. After everything has been updated successfully, it will finally ask you to reboot your system. Confirm to let the system reboot (it will boot with an updated kernel).
The following options in ngcp-upgrade can be specially useful in some
instances of upgrade:
--step-by-step: confirm before proceeding to next step. With this option
the upgrade operation is performed confirming every step before execution,
with the possibility to instruct to continue without confirming further steps
until the end (if confirmation is only needed for some steps at the
beginning).
--pause-before-step STEP_NAME: pause execution before step, given by the
name of the script (e.g. "backup_mysql_db"). This option can be useful in
several scenarios, for example:
--step-by-step), or just continue without stop until the end
--skip-db-backup: This will speed-up the process in cases where it’s
deemed unnecessary, and this is very likely in the upgrade of nodes other than
the first.
Sipwise C5 introduces Maintenance Mode with its mr5.4.1 release. The maintenance mode of Sipwise C5 will disable some background services (for instance: ngcp-mediator) during the software upgrade. It thus prevents the system from getting into an inconsistent state while the upgrade is being performed. You can activate maintenance mode by applying a simple configuration change as described later.
ngcpcfg set /etc/ngcp-config/config.yml "general.maintenance=yes"
ngcpcfg apply 'Enabling maintenance mode before the upgrade to mr8.4.2'
Execute the following commands as root:
ngcp-prepare-upgrade mr8.4.2 ngcp-upgrade
Once up again, double-check your config file /etc/ngcp-config/config.yml (sections will be rearranged now and will contain more parameters) and your domain/subscriber/peer configuration and test the setup.
In order to disable the maintenance mode, do the following:
ngcpcfg set /etc/ngcp-config/config.yml "general.maintenance=no"
ngcpcfg apply 'Disable the maintenance mode after the upgrade to mr8.4.2'
ngcp-bcrypt-webpassword should be used, which will encrypt all subscribers web passwords
(The process will take some time. The duration depends on amount of subscribers in DB.
The tool works in a several threads depends on CPUs count.
Please ensure you have big enough maintenance window to hash all subscribers web passwords.
The tool can be aborted and restarted anytime later. The platform supports both hashed and
plain text passwords in database at the moment):
ngcp-bcrypt-webpassword --verbose
When everything has finished successfully, check that replication is running.
Check ngcp-status.
Finally, do a basic functionality test.
Check the web interface, register two test subscribers and perform a test call
between them to ensure call routing works.
| info | |
You can find a backup of some important configuration files of your existing installation under /ngcp-data/backup/ngcp-mr8.4.2-* (where * is a place holder for a timestamp) in case you need to roll back something at any time. A log file of the upgrade procedure is available at /ngcp-data/backup/ngcp-mr8.4.2-*/upgrade.log. |
If your current release is already the latest or you prefer to be on the LTS release, we still suggest applying the latest hotfixes and critical bug fixes.
Execute all steps as described in Section 15.3, “Pre-upgrade checks”. They include the system checks, customtt/patchtt preparation and others. It is important to execute all the steps from the above chapter.
Merge/add the custom configuration templates if needed.
Apply the changes to configuration templates:
ngcpcfg apply 'apply customtt/patchtt after installing the latest packages'
Execute the final checks as described in the Post-upgrade checks section.