Sipwise C5 mr10.5.1 Released

IMPORTANT: [PRO-Carrier] The ‘ngcp-sems-modules’ package has been deprecated and all the code/libraries provided by that (.so plug-in’s) are from now on provided by the ‘ngcp-sems-pbx’ package. From the NGCP users perspective nothing has really changed, apart that ‘ngcp-sems-modules’ package does not exist anymore. The ‘ngcp-sems-pbx’ package provides .so plug-in’s into the ‘/usr/lib/sems-pbx/plug-in/’ directory of the file system. [TT#174554]

Added support for g729, g722 and Opus codec on SEMS. This allows SEMS to play announcements and music-on-hold using these new codecs [TT#169904].

Two new options are added to ‘config.yml’: ‘b2b.sbc.codec_list’ and ‘tpcc.codec_list’. The first indicates the list of codecs enabled on SEMS,
while the second indicates the codecs used on TPCC’s generated calls. For both parameters the available options are ‘PCMA’ , ‘PCMU’, ‘g729’, ‘g722’ and ‘opus’.
The codecs have to be listed in priority order with no spaces between the elementes, for example “PCMA,PCMU,g729,g722,opus”. [TT#169766].

The ‘tags_header’ concept for templating of sems-b2b configurations has been introduced. Now all the templating concerning sems-b2b is being done using it.
In case of having any customtt files applied above the existing sems-b2b configurations, check them carefully to actualize them.
And if your customtt files are covering a work on the templating scope of sems-b2b configurations, then rework your existing customtt files so,
that they are applied above the ‘tags_header’ instead. [TT#168500]

For security reasons TLS protocol versions have been restricted to versions 1.2 and 1.3 where applicable. If support for older TLS versions (up to and including 1.1) is needed for certain services, then this support can be explicitly re-enabled through the respective configuration keys in ‘config.yml’ (under ‘nginx.ssl_*’ for HTTP interfaces, under ‘prosody.tls.‘ for XMMP, and under ‘kamailio.lb.tls.‘ for SIP). Not affected by this change is the interface for device auto-provisioning as such a change is likely to cause problems with existing devices. [TT#175102]

Removed obsolete RTC Engine, Janus and ComX components. [TT#175000]

New config.yml option kamailio.lb.filter_content_type. This option helps to filter from requests, reply or both some specific body content-type.
This parameter substitutes the already existing kamailio.lb.remove_isup_body_from_replies, extending its functionality to other content types.
The migration from the previous setting to the new one is automatically done during the upgrade.
For additional info please see Message Body Filtering. [TT#68165]

[PRO-Carrier] The option kamailio.proxy.xfer_other_party_pai has been extended for both attended and unattended call transfers.
If this option is set to “yes”, then newly generated P-Asserted-Identity SIP Header sent to the “Transfer Target” will contain data relative to the “Transferee” and vice versa.
This will cause in the phones to update their display with data relative to the parties in conversation. [TT#165301] [TT#165302]

Removed Heartbeat v2 support, which was deprecated in mr10.0.
Systems should switch the High Availability subsystem to Corosync/Pacemaker
before upgrading. [TT#174750]

[PRO-Carrier] Add support for LNP lookup via an external 302 SIP redirect server. NGCP LNP Daemon now supports the possibility to query an external server that
provides the redirecting number and lnp code in the Contact and X-LNP (it can be customized) headers of a plain 302 SIP reply message External LNP via LNP API. [TT#169903]

SIP Loop Detection option is now enabled at default inside config.yml,more info about loop detection here Sip Loop Detection. [TT#181350]

New config.yml options kamailio.proxy.presence.notifier_poll_rate and kamailio.proxy.presence.notifier_processes. These options help in tuning kamailio presence module behavior.
In particular, the first parameter defines the number of times per second that the notifier processes should check for work, the latter controls the number of notifier processes that should be started.
The default values are ‘3’ and ‘1’ respectively and are valid for system with low resources or systems that doesn’t use ‘presence’ feature too much.
In systems where the ‘presence’ feature is highly used, the seggestion is to configure them to ’10’ and ‘3’ respectivelly. [TT#183550]

[CE] Header Manipulations and Phonebook features are now hidden on CE and not available on the UI and via the API anymore. This is for better consistency as while the features was shown on the UI/API the actual functionalty of these features was not availalbe for the CE users. [TT#182053] [TT#182101]

Handling of the transport protocol has been added for SIP peering outbound registrations (ngcp-panel). Now the main transport used in SIP peering configurations, is the one to be used for registering. [TT#167300]

[PRO-Carrier] ‘outbound_proxy_set’ and ‘outbound_proxy_set_port’ parameters has been added to the db_reg_agent.conf. Now if the SIP peering has a specific outbound_socket selected and the setup has multi-active LB architecture, outbound registrations will be sent via the correct LB only (the one owning this outbound_socket). [TT#167300]

The config.yml ‘sems’ settings are now migrated to the “b2b” section. The config.yml ‘sems’ section is from now on deprecated. The constants.yml ‘sems’ section is renamed to ‘b2b’. [TT#169602]

[PRO-Carrier] The ‘libinewrate’ package and all the code/libraries provided by that will be deprecated starting from mr11.0.1. [TT#179901]

[PRO-Carrier] The config.yml parameter ‘b2b.prepaid.inew’ will be deprecated starting from mr11.0.1. [TT#179901]

API /api/journals endpoint is now managed by default by the new ngcp-rest-api server instead of ngcp-panel, it has got
an enhanced security and visibility scope. [TT#180255]

the following new columns are available:

incompatible changes:

Some PBX devices are deprecated starting from mr10.5.1+ version. Those are phones for which the device manufacturer has dropped hardware and software support entirely.
These are still available for autoprovisioning for now, but will no longer be supported and potentially removed in a future versions of NGCP. See the updated list at available pre-configured devices.