/etc/ngcp-config/config.yml is the main configuration YAML file used by Sipwise C5. After every changes it need to run the command ngcpcfg apply "my commit message" to apply changes (followed by ngcpcfg push in the PRO version to apply changes to sp2). The following is a brief description of the main variables contained into /etc/ngcp-config/config.yml file.
This section contains parameters for the additional applications that may be activated on Sipwise C5.
apps: malicious_call: no
The following is the asterisk section:
asterisk:
log:
facility: local6
rtp:
maxport: 20000
minport: 10000
sip:
bindport: 5070
dtmfmode: rfc2833
voicemail:
enable: no
fromstring: 'Voicemail server'
greeting:
busy_custom_greeting: '/home/user/file_no_extension'
busy_overwrite_default: no
busy_overwrite_subscriber: no
unavail_custom_greeting: '/home/user/file_no_extension'
unavail_overwrite_default: no
unavail_overwrite_subscriber: no
mailbody: 'You have received a new message from ${VM_CALLERID} in voicebox ${VM_MAILBOX} on ${VM_DATE}.'
mailsubject: '[Voicebox] New message ${VM_MSGNUM} in voicebox ${VM_MAILBOX}'
max_msg_length: 180
maxgreet: 60
maxmsg: 30
maxsilence: 0
min_msg_length: 3
normalize_match: '^00|\+([1-9][0-9]+)$'
normalize_replace: '$1'
serveremail: voicebox@sip.sipwise.comThe following is the autoprovisioning section:
autoprov:
hardphone:
skip_vendor_redirect: no
server:
bootstrap_port: 1445
ca_certfile: '/etc/ngcp-config/ssl/client-auth-ca.crt'
host: localhost
port: 1444
server_certfile: '/etc/ngcp-config/ssl/myserver.crt'
server_keyfile: '/etc/ngcp-config/ssl/myserver.key'
ssl_enabled: yes
softphone:
config_lockdown: 0
webauth: 0The following is the backup tools section:
backuptools:
cdrexport_backup:
enable: no
etc_backup:
enable: no
mail:
address: noc@company.org
error_subject: '[ngcp-backup] Problems detected during daily backup'
log_subject: '[ngcp-backup] Daily backup report'
send_errors: no
send_log: no
mysql_backup:
enable: no
exclude_dbs: 'syslog sipstats information_schema'
rotate_days: 7
storage_dir: '/ngcp-data/backup/ngcp_backup'
temp_backup_dir: '/tmp/ngcp_backup'The following is the cdr export section:
cdrexport: daily_folder: yes export_failed: no export_incoming: no exportpath: '/home/jail/home/cdrexport' full_names: yes monthly_folder: yes
The following is the cleanup tools section:
cleanuptools:
acc_cleanup_days: 90
archive_targetdir: '/ngcp-data/backups/cdr'
binlog_days: 15
cdr_archive_months: 2
cdr_backup_months: 2
cdr_backup_retro: 3
compress: gzip
delete_old_cdr_files:
enable: no
max_age_days: 30
paths:
-
max_age_days: ~
path: '/home/jail/home/*/20[0-9][0-9][0-9][0-9]/[0-9][0-9]'
remove_empty_directories: yes
wildcard: yes
-
max_age_days: ~
path: '/home/jail/home/cdrexport/resellers/*/20[0-9][0-9][0-9][0-9]/[0-9][0-9]'
remove_empty_directories: yes
wildcard: yes
-
max_age_days: ~
path: '/home/jail/home/cdrexport/system/20[0-9][0-9][0-9][0-9]/[0-9][0-9]'
remove_empty_directories: yes
wildcard: yes
sql_batch: 10000
trash_cleanup_days: 30acc table in kamailio database
will be deleted after this time
cdr_backup_months months first, and store them
in backup tables. Any older record will be left untouched.
cleanuptools.delete_old_cdr_files:
yes) or disable (no) exported CDR cleanup.
paths: an array of path definitions
yes) or disable (no) using wildcards in the path
yes) or disable (no) removing empty
directories if those are found in the given path
path
acc_trash and acc_backup
tables in kamailio database will be deleted.
For the description of cleanuptools please visit Cleanuptools Description Section 15.4, “Accounting Data (CDR) Cleanup” section of the handbook.
The following is the cluster sets section:
cluster_sets:
default:
dispatcher_id: 50
default_set: default
type: centraldefault
central or distributed
The following is the database section:
database: bufferpoolsize: 24768M
The following is the fax server section:
faxserver: enable: yes fail_attempts: '3' fail_retry_secs: '60' mail_from: 'Sipwise C5 FaxServer <voipfax@ngcp.sipwise.local>'
The following is the general section:
general: adminmail: adjust@example.org companyname: sipwise lang: en maintenance: no production: yes timezone: localtime
The following is the heartbeat section:
heartbeat:
hb_watchdog:
action_max: 5
enable: yes
interval: 10
transition_max: 10
pingnodes:
- 10.60.1.1
- 192.168.3.4The following is the legal intercept section:
intercept: enable: no
The following is the kamailio section:
kamailio:
lb:
cfgt: no
debug:
enable: no
modules:
- level: '1'
name: core
- level: '3'
name: xlog
debug_level: '1'
dns:
dns_sctp_pref: 1
dns_tcp_pref: 1
dns_tls_pref: 1
dns_try_naptr: no
dns_udp_pref: 1
use_dns_cache: on
external_sbc: []
extra_sockets: ~
max_forwards: '70'
mem_log: '1'
mem_summary: '12'
max_inv_lifetime: '180000'
nattest_exception_ips:
- 1.2.3.4
- 5.6.7.8
pkg_mem: '16'
port: '5060'
remove_isup_body_from_replies: no
sdp_line_filter:
enable: no
remove_line_startswith: []
security:
dos_ban_enable: yes
dos_ban_time: '300'
dos_reqs_density_per_unit: '50'
dos_sampling_time_unit: '5'
dos_whitelisted_ips: []
dos_whitelisted_subnets: []
failed_auth_attempts: '3'
failed_auth_ban_enable: yes
failed_auth_ban_time: '3600'
topoh:
enable: no
mask_callid: no
mask_ip: 127.0.0.8
topos:
enable: no
redis_db: 24
shm_mem: '64'
skip_contact_alias_for_ua_when_tcp:
enable: no
user_agent_patterns: []
start: yes
strict_routing_safe: no
syslog_options: yes
tcp_children: 1
tcp_max_connections: '2048'
tls:
enable: no
port: '5061'
sslcertfile: /etc/ngcp-config/ssl/myserver.crt
sslcertkeyfile: /etc/ngcp-config/ssl/myserver.key
udp_children: 1
proxy:
allow_info_method: no
allow_msg_method: no
allow_peer_relay: no
allow_refer_method: no
always_anonymize_from_user: no
authenticate_bye: no
block_useragents:
action: reject
enable: no
mode: blacklist
ua_patterns: []
cf_depth_limit: '10'
cfgt: no
check_prev_forwarder_as_upn: no
children: 1
debug:
enable: no
modules:
- level: '1'
name: core
- level: '3'
name: xlog
debug_level: '1'
default_expires: '3600'
default_expires_range: '30'
dlg_timeout: '43200'
early_rejects:
block_admin:
announce_code: '403'
announce_reason: Blocked by Admin
block_callee:
announce_code: '403'
announce_reason: Blocked by Callee
block_caller:
announce_code: '403'
announce_reason: Blocked by Caller
block_contract:
announce_code: '403'
announce_reason: Blocked by Contract
block_in:
announce_code: '403'
announce_reason: Block in
block_out:
announce_code: '403'
announce_reason: Blocked out
block_override_pin_wrong:
announce_code: '403'
announce_reason: Incorrect Override PIN
callee_busy:
announce_code: '486'
announce_reason: Busy Here
callee_offline:
announce_code: '480'
announce_reason: Offline
callee_tmp_unavailable:
announce_code: '480'
announce_reason: Temporarily Unavailable
callee_tmp_unavailable_gp:
announce_code: '480'
announce_reason: Unavailable
callee_tmp_unavailable_tm:
announce_code: '408'
announce_reason: Request Timeout
callee_unknown:
announce_code: '404'
announce_reason: Not Found
cf_loop:
announce_code: '480'
announce_reason: Unavailable
emergency_invalid:
announce_code: '404'
announce_reason: Emergency code not available in this region
emergency_unsupported:
announce_code: '403'
announce_reason: Emergency Calls Not Supported
invalid_speeddial:
announce_code: '484'
announce_reason: Speed-Dial slot empty
locked_in:
announce_code: '403'
announce_reason: Callee locked
locked_out:
announce_code: '403'
announce_reason: Caller locked
max_calls_in:
announce_code: '486'
announce_reason: Busy
max_calls_out:
announce_code: '403'
announce_reason: Maximum parallel calls exceeded
no_credit:
announce_code: '402'
announce_reason: Insufficient Credit
peering_unavailable:
announce_code: '503'
announce_reason: PSTN Termination Currently Unavailable
reject_vsc:
announce_code: '403'
announce_reason: VSC Forbidden
relaying_denied:
announce_code: '403'
announce_reason: Relaying Denied
unauth_caller_ip:
announce_code: '403'
announce_reason: Unauthorized IP detected
emergency_priorization:
enable: no
register_fake_200: yes
register_fake_expires: '3600'
reject_code: '503'
reject_reason: Temporary Unavailable
retry_after: '3600'
enum_suffix: e164.arpa.
expires_range: '30'
filter_100rel_from_supported: no
filter_failover_response: 408|500|503
foreign_domain_via_peer: no
fritzbox:
enable: no
prefixes:
- 0$avp(caller_ac)
- $avp(caller_cc)$avp(caller_ac)
- \+$avp(caller_cc)$avp(caller_ac)
- 00$avp(caller_cc)$avp(caller_ac)
special_numbers:
- '112'
- '110'
- 118[0-9]{2}
ignore_auth_realm: no
ignore_subscriber_allowed_clis: no
keep_original_to: no
latency_limit_action: '100'
latency_limit_db: '500'
latency_log_level: '1'
latency_runtime_action: 1000
lnp:
add_reply_headers:
enable: no
number: P-NGCP-LNP-Number
status: P-NGCP-LNP-Status
api:
add_caller_cc_to_lnp_dst: no
invalid_lnp_routing_codes:
- ^EE00
- ^DD00
keepalive_interval: '3'
lnp_request_blacklist: []
lnp_request_whitelist: []
port: '8991'
reply_error_on_lnp_failure: no
request_timeout: '1000'
server: localhost
tcap_field_fci: end.components.0.invoke.parameter
tcap_field_lnp: ConnectArg.destinationRoutingAddress.0
tcap_field_opcode: end.components.0.invoke.opCode
enable: no
skip_callee_lnp_lookup_from_any_peer: no
type: api
lookup_peer_destination_domain_for_pbx: no
loop_detection:
enable: no
expire: '1'
max: '5'
max_expires: '43200'
max_gw_lcr: '128'
max_registrations_per_subscriber: '5'
mem_log: '1'
mem_summary: '12'
min_expires: '60'
nathelper:
sipping_from: sip:pinger@sipwise.local
nathelper_dbro: no
natping_interval: '30'
natping_processes: 1
nonce_expire: '300'
pbx:
hunt_display_fallback_format: '[H %s]'
hunt_display_fallback_indicator: $var(cloud_pbx_hg_ext)
hunt_display_format: '[H %s]'
hunt_display_indicator: $var(cloud_pbx_hg_displayname)
hunt_display_maxlength: 8
ignore_cf_when_hunting: no
skip_busy_hg_members:
enable: no
redis_key_name: totaluser
peer_probe:
available_treshold: '1'
enable: yes
from_uri_domain: probe.ngcp.local
from_uri_user: ping
interval: '10'
method: OPTIONS
reply_codes: class=2;class=3;code=403;code=404;code=405
timeout: '5'
unavailable_treshold: '1'
perform_peer_failover_on_tm_timeout: yes
perform_peer_lcr: no
pkg_mem: '32'
port: '5062'
presence:
enable: yes
max_expires: '3600'
reginfo_domain: example.org
proxy_lookup: no
push:
apns_alert: New call
apns_sound: incoming_call.xaf
report_mos: yes
set_ruri_to_peer_auth_realm: no
shm_mem: '125'
start: yes
store_recentcalls: no
syslog_options: yes
tcp_children: 1
tm:
fr_inv_timer: '180000'
fr_timer: '9000'
max_inv_lifetime: '180000'
treat_600_as_busy: yes
use_enum: no
usrloc_dbmode: '1'
voicebox_first_caller_cli: yeskamailio-lb.
yes, the SIP Call-ID header will also be encoded.
kamailio-options-lb.log.
anonymize_from_user for all peers.
drop, reject] - Whether to silently drop the request from matching User-Agent or reject with a 403 message.
whitelist, blacklist] - Sets the mode of ua_patterns list evaluation (whitelist: block requests coming from all but listed User-Agents, blacklist: block requests from all listed User-Agents).
Diversion or History-Info header.
kamailio-proxy.
default_expires_range seconds of the default_expires parameter.
kamailio.proxy.emergency_prioritization.retry_after: Retry-After value when rejecting the non-emergency request.
| tip | |
In order to learn about details of emergency priorization function of NGCP please refer to Section 7.7, “Emergency Priorization” part of the handbook. |
allowed_clis preference so that the User-Provided CLI is only checked against customer’s allowed_clis preference.
api type]: number matching pattern for routing numbers that represent invalid call destinations; an announcement is played in that case and the call is dropped.
api type]: list of matching patterns of called numbers for which LNP lookup must be done.
api type]: list of matching patterns of called numbers for which LNP lookup must not be done.
api type]: timeout in milliseconds while Proxy waits for the response of an LNP query from Sipwise LNP daemon.
local (local LNP database) and api (LNP lookup through external gateways). PLEASE NOTE: the api type of LNP lookup is only available for Sipwise C5 PRO / CARRIER installations.
hunt_display_format and hunt_display_indicator can not be used (as in the case of not provisioned subscriber settings). The %s part is replaced with the value of the hunt_display_fallback_indicator variable.
$var(cloud_pbx_hg_ext) which is populated during call routing with the extension of the hunt group.
hunt_display_indicator variable.
$var(cloud_pbx_hg_displayname) which is populated during call routing with the provisioned Display Name of the hunt group.
totaluser, activeuser] - Sets the internal redis key name that contains the number of active calls for the user.
class=2;class=3;code=403;code=404;code=405, with class defining a code range.
kamailio.proxy.peer_probe.method: [OPTIONS|INFO] - Request method for probe request.
| tip | |
You can find more information about peer probing configuration in Section 7.11.2, “Configuration of Peer Probing” of the handbook. |
kamailio-options-proxy.log.
The following is the ngcp-mediator section:
mediator: interval: 10
The following is the modules section:
modules:
- enable: no
name: dummy
options: numdummies=2The following is the check tools section:
monitoring:
interval: 10
retrospect_interval: 30
threshold:
cpu_idle_min: '0.1'
disk_used_max: '0.9'
kamailio_lb_shmem_min: '1048576'
kamailio_proxy_shmem_min: '1048576'
load_long_max: '2'
load_medium_max: '2'
load_short_max: '3'
mem_used_max: 0.98
mta_queue_len_max: '15'
sip_responsiveness_max: '15'
sslcert_timetoexpiry: '30'
sslcert_whitelist: []
swap_free_min: 0.02The following is the nginx section:
nginx: status_port: 8081 xcap_port: 1080
The following is the ntp server section:
ntp:
servers:
- 0.debian.pool.ntp.org
- 1.debian.pool.ntp.org
- 2.debian.pool.ntp.org
- 3.debian.pool.ntp.orgThe following is the ossbss section:
ossbss:
apache:
port: 2443
proxyluport: 1080
restapi:
sslcertfile: '/etc/ngcp-panel/api_ssl/api_ca.crt'
sslcertkeyfile: '/etc/ngcp-panel/api_ssl/api_ca.key'
serveradmin: support@sipwise.com
servername: "\"myserver\""
ssl_enable: yes
sslcertfile: '/etc/ngcp-config/ssl/myserver.crt'
sslcertkeyfile: '/etc/ngcp-config/ssl/myserver.key'
frontend: no
htpasswd:
-
pass: '{SHA}w4zj3mxbmynIQ1jsUEjSkN2z2pk='
user: ngcpsoap
logging:
apache:
acc:
facility: daemon
identity: oss
level: info
err:
facility: local7
level: info
ossbss:
facility: local0
identity: provisioning
level: DEBUG
web:
facility: local0
level: DEBUG
provisioning:
allow_ip_as_domain: 1
allow_numeric_usernames: 0
auto_allow_cli: 1
carrier:
account_distribution_function: roundrobin
prov_distribution_function: roundrobin
credit_warnings:
-
domain: example.com
recipients:
- nobody@example.com
threshold: 1000
faxpw_min_char: 0
log_passwords: 0
no_logline_truncate: 0
pw_min_char: 6
routing:
ac_regex: '[1-9]\d{0,4}'
cc_regex: '[1-9]\d{0,3}'
sn_regex: '[1-9]\d+'
tmpdir: '/tmp'The following is the PBX section:
pbx: bindport: 5085 enable: no highport: 55000 lowport: 50001 media_processor_threads: 10 session_processor_threads: 10 xmlrpcport: 8095
The following is the prosody section:
prosody: ctrl_port: 5582 log_level: info
The following is the pushd section:
pushd:
apns:
enable: yes
endpoint: api.push.apple.com
endpoint_port: 0
extra_instances:
- certificate: '/etc/ngcp-config/ssl/PushCallkitCert.pem'
enable: yes
key: '/etc/ngcp-config/ssl/PushCallkitKey.pem'
type: callkit
http2_jwt:
ec_key: '/etc/ngcp-config/ssl/AuthKey_ABCDE12345.pem'
ec_key_id: 'ABCDE12345'
enable: yes
issuer: 'VWXYZ67890'
tls_certificate: ''
tls_key: ''
topic: 'com.example.appID'
legacy:
certificate: '/etc/ngcp-config/ssl/PushChatCert.pem'
feedback_endpoint: feedback.push.apple.com
feedback_interval: '3600'
key: '/etc/ngcp-config/ssl/PushChatKey.pem'
socket_timeout: 0
domains:
- apns:
endpoint: api.push.apple.com
extra_instances:
- certificate: '/etc/ngcp-config/ssl/PushCallkitCert-example.com.pem'
enable: no
key: '/etc/ngcp-config/ssl/PushCallkitKey-example.com.pem''
type: callkit
http2_jwt:
ec_key: '/etc/ngcp-config/ssl/AuthKey_54321EDCBA.pem'
ec_key_id: '54321EDCBA'
issuer: '09876ZYXWV'
tls_certificate: ''
tls_key: ''
topic: 'com.example.otherAppID'
legacy:
certificate: '/etc/ngcp-config/ssl/PushChatCert-example.com.pem'
feedback_endpoint: feedback.push.apple.com
key: '/etc/ngcp-config/ssl/PushChatKey-example.com.pem'
domain: example.com
enable: yes
gcm:
key: 'google_api_key_for_example.com_here'
enable: yes
gcm:
enable: yes
key: 'google_api_key_here'
priority:
call: high
groupchat: normal
invite: normal
message: normal
muc:
exclude: []
force_persistent: 'true'
owner_on_join: 'true'
one_device_per_subscriber: no
port: 45060
processes: 4
ssl: yes
sslcertfile: /etc/ngcp-config/ssl/CAsigned.crt
sslcertkeyfile: /etc/ngcp-config/ssl/CAsigned.key
unique_device_ids: noThe QoS section allows configuring the ToS (Type of Service) feature:
qos: tos_rtp: 184 tos_sip: 184
| tip | |
The ToS byte includes both DSCP and ECN bits. So, specify the DSCP value multiplied by four (46x4=184) and, optionally, add the required ECN value to it (1, 2 or 3). |
Set the rtpproxy.control_tos parameter higher than zero to enable ToS.
The following is the ngcp-rate-o-mat section:
rateomat: enable: yes loopinterval: 10 splitpeakparts: 0
The following is the redis section:
redis: database_amount: 16 port: 6379 syslog_ident: redis
The following is the reminder section:
reminder: retries: 2 retry_time: 60 sip_fromdomain: voicebox.sipwise.local sip_fromuser: reminder wait_time: 30 weekdays: '2, 3, 4, 5, 6, 7'
The following is the rsyslog section:
rsyslog:
elasticsearch:
action:
resumeretrycount: '-1'
bulkmode: 'on'
dynSearchIndex: 'on'
enable: yes
queue:
dequeuebatchsize: 300
size: 5000
type: linkedlist
external_address:
external_log: 0
external_loglevel: warning
external_port: 514
external_proto: udp
ngcp_logs_preserve_days: 93The following is the rtp proxy section:
rtpproxy:
allow_userspace_only: yes
cdr_logging_facility: ''
control_tos: 0
delete_delay: 30
dtls_passive: no
enable: yes
final_timeout: 0
firewall_iptables_chain: ''
graphite:
interval: 600
prefix: rtpengine.
server: ''
log_level: '6'
maxport: '40000'
minport: '30000'
num_threads: 0
prefer_bind_on_internal: no
recording:
enable: no
mp3_bitrate: '48000'
log_level: '6'
nfs_host: 192.168.1.1
nfs_remote_path: /var/recordings
output_dir: /var/lib/rtpengine-recording
output_format: wav
output_mixed: yes
output_single: yes
resample: no
resample_to: '16000'
spool_dir: /var/spool/rtpengine
rtcp_logging_facility: ''
rtp_timeout: '60'
rtp_timeout_onhold: '3600'log_level above, but for the recording daemon.
The following is the security section. Usage of the firewall subsection is described in Section 16.2, “Firewalling”:
security:
firewall:
enable: no
logging:
days_kept: '7'
enable: yes
file: /var/log/firewall.log
tag: NGCPFW
nat_rules4: ~
nat_rules6: ~
policies:
forward: DROP
input: DROP
output: ACCEPT
rules4: ~
rules6: ~no)
7)
yes)
/var/log/firewall.log)
DROP is added to any tag indicating the action triggering the message, default: NGCPFW)
nat using iptables-persistent syntax (default: undef)
nat using iptables-persistent syntax (default: undef)
FORWARD chain (default: DROP)
INPUT chain (default: DROP)
OUTPUT chain (default: ACCEPT)
filter using iptables-persistent syntax (default: undef)
filter using iptables-persistent syntax (default: undef)
The following is the SEMS section:
sems:
bindport: 5080
conference:
enable: yes
max_participants: 10
debug: no
highport: 50000
lowport: 40001
media_processor_threads: 10
prepaid:
enable: yes
sbc:
calltimer_enable: yes
calltimer_max: 3600
outbound_timeout: 6000
profile:
- custom_header: []
name: ngcp
- custom_header: []
name: ngcp_cf
sdp_filter:
codecs: PCMA,PCMU,telephone-event
enable: yes
mode: whitelist
session_timer:
enable: yes
max_timer: 7200
min_timer: 90
session_expires: 300
session_processor_threads: 10
vsc:
block_override_code: 80
cfb_code: 90
cfna_code: 93
cft_code: 92
cfu_code: 72
clir_code: 31
directed_pickup_code: 99
enable: yes
park_code: 97
reminder_code: 55
speedial_code: 50
unpark_code: 98
voicemail_number: 2000
xmlrpcport: 8090This section provides configuration of Short Message Service on the NGCP. Description of the SMS module is provided earlier in this handbook here Section 7.27, “SMS (Short Message Service) on Sipwise C5”.
In the below example you can see the default values of the configuration parameters.
sms:
core:
admin_port: '13000'
smsbox_port: '13001'
enable: no
loglevel: '0'
sendsms:
max_parts_per_message: '5'
port: '13002'
smsc:
dest_addr_npi: '1'
dest_addr_ton: '1'
enquire_link_interval: '58'
host: 1.2.3.4
id: default_smsc
max_pending_submits: '10'
no_dlr: yes
password: password
port: '2775'
source_addr_npi: '1'
source_addr_ton: '1'
system_type: ''
throughput: '5'
transceiver_mode: '1'
username: usernameyes if you want to enable SMS module.
sms.smsc. : Parameters of the connection to an SMSC
yes, Sipwise C5 will not request DR for the message(s). May be required for
some particular SMSCs, in order to avoid "Incorrect status report request parameter usage"
error messages from the SMSC.
1 (yes / true), Sipwise C5 will attempt to use a TRANSCEIVER
mode connection to the SMSC. It uses the standard transmit port of the SMSC for
receiving SMs too.
The following is the snmpd section:
snmpd:
agentx_timeout: 15
communities:
- name: public
sources:
- localhost
trap_communities:
- name: public
targets:
- localhost
traps:
if:
link: '1'
ucd:
disk: '1'
exec: '1'
load: '1'
process: '1'
swap: '1'ngcp-snmp-agent).
sources) for a community (like public in the example) are in a
list of hashes format, each line starting with "-" and followed by the name
and a list of source addresses.
snmpd.communities, but
instead of sources it uses targets.
The following is the snmptrapd section:
snmptrapd: enable: no
The following is the SNMP Agent section:
snmpagent:
daemonize: '1'
debug: '0'
retrospect_interval: 30
traps:
collective_check: '1'
database: '1'
ha_switchover: '1'
peering: '1'
process: '1'
traps_origin: mgmt
update_interval: '30'The following is the sshd section:
sshd:
listen_addresses:
- 0.0.0.0The following is in the sudo section:
sudo: logging: no max_log_sessions: 0
The following is in the telegraf section:
telegraf: interval: ~
monitoring.interval.
The following is the ngcp-witnessd tool section:
witnessd:
debug: '0'
interval: ~
gather:
asr_ner_statistics: '1'
ha_node_force: '0'
ha_node_state: '1'
mta_queue_len: '1'
kamailio_concurrent_calls: '1'
kamailio_dialog_active: '1'
kamailio_dialog_early: '1'
kamailio_dialog_incoming: '1'
kamailio_dialog_local: '1'
kamailio_dialog_outgoing: '1'
kamailio_dialog_relay: '1'
kamailio_shmem: '1'
kamailio_usrloc_regdevices: '1'
kamailio_usrloc_regusers: '1'
peering_groups: '1'
mpt_status: '0'
mysql_global_status: '1'
mysql_slave_status: '1'
mysql_replicate_check_interval: '3600'
mysql_replicate_check_tables:
- accounting
- billing
- carrier
- kamailio
- ngcp
- provisioning
- prosody
- rtcengine
- stats
mysql_replicate_ignore_tables:
- accounting.acc_backup
- accounting.acc_trash
- kamailio.acc_backup
- kamailio.acc_trash
- ngcp.pt_checksums_sp1
- ngcp.pt_checksums_sp2
- ngcp.pt_checksums
oss_provisioned_subscribers: '1'
sip_responsiveness: '1'
sip_stats_num_packets: '1'
sip_stats_num_packets_perday: '1'
sip_stats_partition_size: '1'monitoring.interval.
The following is the WEB Admin interface (www_admin) section:
www_admin:
ac_dial_prefix: 0
apache:
autoprov_port: 1444
billing_features: 1
callingcard_features: 0
callthru_features: 0
cc_dial_prefix: 00
conference_features: 1
contactmail: adjust@example.org
dashboard:
enable: 1
default_admin_settings:
call_data: 0
is_active: 1
is_master: 0
read_only: 0
show_passwords: 1
domain:
preference_features: 1
rewrite_features: 1
vsc_features: 0
fastcgi_workers: 2
fax_features: 1
fees_csv:
element_order:
- source
- destination
- direction
- zone
- zone_detail
- onpeak_init_rate
- onpeak_init_interval
- onpeak_follow_rate
- onpeak_follow_interval
- offpeak_init_rate
- offpeak_init_interval
- offpeak_follow_rate
- offpeak_follow_interval
- use_free_time
http_admin:
autoprov_port: 1444
port: 1443
serveradmin: support@sipwise.com
servername: "\"myserver\""
ssl_enable: yes
sslcertfile: '/etc/ngcp-config/ssl/myserver.crt'
sslcertkeyfile: '/etc/ngcp-config/ssl/myserver.key'
http_csc:
autoprov_bootstrap_port: 1445
autoprov_port: 1444
port: 443
serveradmin: support@sipwise.com
servername: "\"myserver\""
ssl_enable: yes
sslcertfile: '/etc/ngcp-config/ssl/myserver.crt'
sslcertkeyfile: '/etc/ngcp-config/ssl/myserver.key'
logging:
apache:
acc:
facility: daemon
identity: oss
level: info
err:
facility: local7
level: info
peer:
preference_features: 1
peering_features: 1
security:
password_allow_recovery: 0
password_max_length: 40
password_min_length: 6
password_musthave_digit: 0
password_musthave_lowercase: 1
password_musthave_specialchar: 0
password_musthave_uppercase: 0
password_sip_autogenerate: 0
password_sip_expose_subadmin: 1
password_web_autogenerate: 0
password_web_expose_subadmin: 1
speed_dial_vsc_presets:
vsc:
- '*0'
- '*1'
- '*2'
- '*3'
- '*4'
- '*5'
- '*6'
- '*7'
- '*8'
- '*9'
subscriber:
auto_allow_cli: 0
extension_features: 0
voicemail_features: 1